Обсуждение проблем ОС и оборудования: задержка реакции системы (latency), микроcтаттер, инпутлаг, фризы.
Перед тем как задавать вопросы, просьба прочитать FAQ
Осуществлять мониторинг программойLatency Monitorнужно в течение 1 минуты, в состоянии простоя системы т.е. без дисковой, сетевой активности, и любой другой, с выключенным ав и приложениями в трее и автозагрузке, не раньше чем через 2 минуты после загрузки системы. Не двигаем мышку и не используем клавиатуру в момент измерений. Потом остановка и скриншот.
Здравствуйте, не особо разбираюсь в подробностях, но моему пк явно не хорошо, Windows 10 ПОМОГИТЕ! биос обновил драйвера обновил на все, что можно. отключал в диспетчере устройства и наблюдал за изменениями в программах, изменения нет.
Member
Статус: Не в сети Регистрация: 25.06.2013 Откуда: Правобережна UA
Agiliter писал(а):
Откройте Stats там есть количество событий для диапазонов.
Это 17 мин Хеви бенча
CONCLUSION _________________________________________________________________________________________________________ Your system appears to be having trouble handling real-time audio and other tasks. You are likely to experience buffer underruns appearing as drop outs, clicks or pops. One or more DPC routines that belong to a driver running in your system appear to be executing for too long. One problem may be related to power management, disable CPU throttling settings in Control Panel and BIOS setup. Check for BIOS updates. LatencyMon has been analyzing your system for 0:17:27 (h:mm:ss) on all processors.
_________________________________________________________________________________________________________ SYSTEM INFORMATION _________________________________________________________________________________________________________ Computer name: DESKTOP-V0SNCL1 OS version: Windows 10 , 10.0, version 1903, build: 18362 (x64) Hardware: MS-7816, MSI, Z87-G43 (MS-7816) CPU: GenuineIntel Intel(R) Core(TM) i5-4690K CPU @ 3.50GHz Logical processors: 4 Processor groups: 1 RAM: 8136 MB total
_________________________________________________________________________________________________________ CPU SPEED _________________________________________________________________________________________________________ Reported CPU speed: 350 MHz
Note: reported execution times may be calculated based on a fixed reported CPU speed. Disable variable speed settings like Intel Speed Step and AMD Cool N Quiet in the BIOS setup for more accurate results.
WARNING: the CPU speed that was measured is only a fraction of the CPU speed reported. Your CPUs may be throttled back due to variable speed settings and thermal issues. It is suggested that you run a utility which reports your actual CPU frequency and temperature.
_________________________________________________________________________________________________________ MEASURED INTERRUPT TO USER PROCESS LATENCIES _________________________________________________________________________________________________________ The interrupt to process latency reflects the measured interval that a usermode process needed to respond to a hardware request from the moment the interrupt service routine started execution. This includes the scheduling and execution of a DPC routine, the signaling of an event and the waking up of a usermode thread from an idle wait state in response to that event.
Highest measured interrupt to process latency (µs): 7913,90 Average measured interrupt to process latency (µs): 4,320662
Highest measured interrupt to DPC latency (µs): 7900,60 Average measured interrupt to DPC latency (µs): 2,231208
_________________________________________________________________________________________________________ REPORTED ISRs _________________________________________________________________________________________________________ Interrupt service routines are routines installed by the OS and device drivers that execute in response to a hardware interrupt signal.
Highest ISR routine execution time (µs): 69,413429 Driver with highest ISR routine execution time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation
Highest reported total ISR routine time (%): 0,220701 Driver with highest ISR total time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation
Total time spent in ISRs (%) 0,289832
ISR count (execution time <250 µs): 1610019 ISR count (execution time 250-500 µs): 0 ISR count (execution time 500-999 µs): 0 ISR count (execution time 1000-1999 µs): 0 ISR count (execution time 2000-3999 µs): 0 ISR count (execution time >=4000 µs): 0
_________________________________________________________________________________________________________ REPORTED DPCs _________________________________________________________________________________________________________ DPC routines are part of the interrupt servicing dispatch mechanism and disable the possibility for a process to utilize the CPU while it is interrupted until the DPC has finished execution.
Highest DPC routine execution time (µs): 7849,614571 Driver with highest DPC routine execution time: ntoskrnl.exe - NT Kernel & System, Microsoft Corporation
Highest reported total DPC routine time (%): 0,348719 Driver with highest DPC total execution time: cmudaxp.sys - C-Media Audio WDM Driver, C-Media Inc
Total time spent in DPCs (%) 0,596227
DPC count (execution time <250 µs): 4383507 DPC count (execution time 250-500 µs): 0 DPC count (execution time 500-999 µs): 10 DPC count (execution time 1000-1999 µs): 2 DPC count (execution time 2000-3999 µs): 0 DPC count (execution time >=4000 µs): 0
_________________________________________________________________________________________________________ REPORTED HARD PAGEFAULTS _________________________________________________________________________________________________________ Hard pagefaults are events that get triggered by making use of virtual memory that is not resident in RAM but backed by a memory mapped file on disk. The process of resolving the hard pagefault requires reading in the memory from disk while the process is interrupted and blocked from execution.
NOTE: some processes were hit by hard pagefaults. If these were programs producing audio, they are likely to interrupt the audio stream resulting in dropouts, clicks and pops. Check the Processes tab to see which programs were hit.
Process with highest pagefault count: svchost.exe
Total number of hard pagefaults 13826 Hard pagefault count of hardest hit process: 6085 Number of processes hit: 45
_________________________________________________________________________________________________________ PER CPU DATA _________________________________________________________________________________________________________ CPU 0 Interrupt cycle time (s): 56,163681 CPU 0 ISR highest execution time (µs): 69,413429 CPU 0 ISR total execution time (s): 12,138161 CPU 0 ISR count: 1610019 CPU 0 DPC highest execution time (µs): 7849,614571 CPU 0 DPC total execution time (s): 24,336016 CPU 0 DPC count: 4302513 _________________________________________________________________________________________________________ CPU 1 Interrupt cycle time (s): 7,078774 CPU 1 ISR highest execution time (µs): 0,0 CPU 1 ISR total execution time (s): 0,0 CPU 1 ISR count: 0 CPU 1 DPC highest execution time (µs): 133,036571 CPU 1 DPC total execution time (s): 0,178035 CPU 1 DPC count: 25374 _________________________________________________________________________________________________________ CPU 2 Interrupt cycle time (s): 7,171112 CPU 2 ISR highest execution time (µs): 0,0 CPU 2 ISR total execution time (s): 0,0 CPU 2 ISR count: 0 CPU 2 DPC highest execution time (µs): 130,608571 CPU 2 DPC total execution time (s): 0,224875 CPU 2 DPC count: 25269 _________________________________________________________________________________________________________ CPU 3 Interrupt cycle time (s): 6,829498 CPU 3 ISR highest execution time (µs): 0,0 CPU 3 ISR total execution time (s): 0,0 CPU 3 ISR count: 0 CPU 3 DPC highest execution time (µs): 129,912286 CPU 3 DPC total execution time (s): 0,231070 CPU 3 DPC count: 30367
4 минуты простоя
CONCLUSION _________________________________________________________________________________________________________ Your system appears to be having trouble handling real-time audio and other tasks. You are likely to experience buffer underruns appearing as drop outs, clicks or pops. One or more DPC routines that belong to a driver running in your system appear to be executing for too long. One problem may be related to power management, disable CPU throttling settings in Control Panel and BIOS setup. Check for BIOS updates. LatencyMon has been analyzing your system for 0:03:58 (h:mm:ss) on all processors.
_________________________________________________________________________________________________________ SYSTEM INFORMATION _________________________________________________________________________________________________________ Computer name: DESKTOP-V0SNCL1 OS version: Windows 10 , 10.0, version 1903, build: 18362 (x64) Hardware: MS-7816, MSI, Z87-G43 (MS-7816) CPU: GenuineIntel Intel(R) Core(TM) i5-4690K CPU @ 3.50GHz Logical processors: 4 Processor groups: 1 RAM: 8136 MB total
_________________________________________________________________________________________________________ CPU SPEED _________________________________________________________________________________________________________ Reported CPU speed: 350 MHz
Note: reported execution times may be calculated based on a fixed reported CPU speed. Disable variable speed settings like Intel Speed Step and AMD Cool N Quiet in the BIOS setup for more accurate results.
WARNING: the CPU speed that was measured is only a fraction of the CPU speed reported. Your CPUs may be throttled back due to variable speed settings and thermal issues. It is suggested that you run a utility which reports your actual CPU frequency and temperature.
_________________________________________________________________________________________________________ MEASURED INTERRUPT TO USER PROCESS LATENCIES _________________________________________________________________________________________________________ The interrupt to process latency reflects the measured interval that a usermode process needed to respond to a hardware request from the moment the interrupt service routine started execution. This includes the scheduling and execution of a DPC routine, the signaling of an event and the waking up of a usermode thread from an idle wait state in response to that event.
Highest measured interrupt to process latency (µs): 88,90 Average measured interrupt to process latency (µs): 1,710205
Highest measured interrupt to DPC latency (µs): 69,70 Average measured interrupt to DPC latency (µs): 0,540075
_________________________________________________________________________________________________________ REPORTED ISRs _________________________________________________________________________________________________________ Interrupt service routines are routines installed by the OS and device drivers that execute in response to a hardware interrupt signal.
Highest ISR routine execution time (µs): 76,865714 Driver with highest ISR routine execution time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation
Highest reported total ISR routine time (%): 0,061120 Driver with highest ISR total time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation
Total time spent in ISRs (%) 0,072134
ISR count (execution time <250 µs): 57075 ISR count (execution time 250-500 µs): 0 ISR count (execution time 500-999 µs): 0 ISR count (execution time 1000-1999 µs): 0 ISR count (execution time 2000-3999 µs): 0 ISR count (execution time >=4000 µs): 0
_________________________________________________________________________________________________________ REPORTED DPCs _________________________________________________________________________________________________________ DPC routines are part of the interrupt servicing dispatch mechanism and disable the possibility for a process to utilize the CPU while it is interrupted until the DPC has finished execution.
Highest DPC routine execution time (µs): 7400,6520 Driver with highest DPC routine execution time: ntoskrnl.exe - NT Kernel & System, Microsoft Corporation
Highest reported total DPC routine time (%): 0,042785 Driver with highest DPC total execution time: nvlddmkm.sys - NVIDIA Windows Kernel Mode Driver, Version 430.64 , NVIDIA Corporation
Total time spent in DPCs (%) 0,083419
DPC count (execution time <250 µs): 623802 DPC count (execution time 250-500 µs): 0 DPC count (execution time 500-999 µs): 0 DPC count (execution time 1000-1999 µs): 0 DPC count (execution time 2000-3999 µs): 0 DPC count (execution time >=4000 µs): 0
_________________________________________________________________________________________________________ REPORTED HARD PAGEFAULTS _________________________________________________________________________________________________________ Hard pagefaults are events that get triggered by making use of virtual memory that is not resident in RAM but backed by a memory mapped file on disk. The process of resolving the hard pagefault requires reading in the memory from disk while the process is interrupted and blocked from execution.
Process with highest pagefault count: none
Total number of hard pagefaults 0 Hard pagefault count of hardest hit process: 0 Number of processes hit: 0
_________________________________________________________________________________________________________ PER CPU DATA _________________________________________________________________________________________________________ CPU 0 Interrupt cycle time (s): 2,364603 CPU 0 ISR highest execution time (µs): 76,865714 CPU 0 ISR total execution time (s): 0,686848 CPU 0 ISR count: 57075 CPU 0 DPC highest execution time (µs): 150,273429 CPU 0 DPC total execution time (s): 0,771705 CPU 0 DPC count: 611309 _________________________________________________________________________________________________________ CPU 1 Interrupt cycle time (s): 1,176026 CPU 1 ISR highest execution time (µs): 0,0 CPU 1 ISR total execution time (s): 0,0 CPU 1 ISR count: 0 CPU 1 DPC highest execution time (µs): 49,9020 CPU 1 DPC total execution time (s): 0,001007 CPU 1 DPC count: 161 _________________________________________________________________________________________________________ CPU 2 Interrupt cycle time (s): 1,808528 CPU 2 ISR highest execution time (µs): 0,0 CPU 2 ISR total execution time (s): 0,0 CPU 2 ISR count: 0 CPU 2 DPC highest execution time (µs): 7400,6520 CPU 2 DPC total execution time (s): 0,020651 CPU 2 DPC count: 12214 _________________________________________________________________________________________________________ CPU 3 Interrupt cycle time (s): 0,878203 CPU 3 ISR highest execution time (µs): 0,0 CPU 3 ISR total execution time (s): 0,0 CPU 3 ISR count: 0 CPU 3 DPC highest execution time (µs): 67,598286 CPU 3 DPC total execution time (s): 0,000946 CPU 3 DPC count: 119
Как я понимаю, то больше всего проблем из-за ntoskrnl.exe. Всегда он вылазит боком. Как с н ми бороться?
Member
Статус: Не в сети Регистрация: 08.08.2016 Фото: 17
То же самое, как у LEOLEOLEO . Пробовал DISM, после этого sfc /scannow. Все хорошо. Dxdiag тоже ничего не находит. Переустановил драйвера на видео, чипсет, звук. Не помогает. Единственное, что заметил, при ручном удалении дров на чипсет, их там только три, хотя ставится пять вроде. А при установке, предлагает переустановить все пять. Странно как-то. Еще в журнале установки обновлений в винде, пишет что ошибка какая-то с одним драйвером из состава чипсета.
_________________ Ryzen 1600; Asus Prime B350 Plus;2x8GB Samsung M378A1K43CB2-CRC; Inno3d Ichill 1060 6GB; 850EVO_250GB 1920х1080
Техподдержка послала нафиг, говорит материнка старая (биос 2012г.), вот и мучайся. Пишу им - так весь мир страдает, и со старым и с новым железом многим выпадает "удача" с вашими картами, погуглите англоязычные форумы. Это замечание было проигнорено.
А я просто перешёл на видеокарту от ATI и забыл про лаги как про страшный сон, ибо показатели DPC Latency были крайне важны, потому что занимаюсь звуком, а из-за этой задержки от видеокарты на 2D графику, приходилось увеличивать буфер ASIO, что отрицательно влияло на скорость отклика на нажатие моих midi устройств и в целом, тормозило проекты.
Member
Статус: Не в сети Регистрация: 08.08.2016 Фото: 17
OLD Hunter Мало времени прошло, еще не успел потестить нормально. Только факт в том, что началось это после обновления. Но я например предыдущую установку делал начисто и ничего вообще не выпиливал из винды. Никаких оптимизаторов и прочего, в надежде, что все будет хорошо работать. И на самом деле работало все неплохо, пока не обновился. На 1809 такого точно не было! Таймеры вроде такие же, как и были. Вообще напичканая мусором десятка уже достала!
_________________ Ryzen 1600; Asus Prime B350 Plus;2x8GB Samsung M378A1K43CB2-CRC; Inno3d Ichill 1060 6GB; 850EVO_250GB 1920х1080
Member
Статус: Не в сети Регистрация: 25.06.2013 Откуда: Правобережна UA
OLD Hunter писал(а):
кроме этих "некрасивых" графиков у вас какие-то еще проблемы в играх/работе?
Ну я замечаю завытки в КС ГО и ПАБГ. То есть идет всё хорошо и просто идет резкая просадка фпс и дальше снова всё хорошо. то есть стоит у меня ограничение в 250фпс и всё идет ровно и идет лаг и на графике фпс виден спад в виде "полосы", то есть не долгие просадки, а моментальный завтык и дальше снова всё хрошо. Если бы не знал об проблеме в 10** картах, то списал бы на какие-то подгрузки, загрузки и прочие, но в том же КС ГО не должно ничего грузиться.
Member
Статус: Не в сети Регистрация: 14.06.2009 Откуда: Омск
Bomchik писал(а):
Если бы не знал об проблеме в 10** картах, то списал бы на какие-то подгрузки, загрузки и прочие, но в том же КС ГО не должно ничего грузиться.
такое запросто может быть из-за сетевого лага и инета. Почитайте тему - у чела было нечто подобное в апекс. Ну и еще можно проверить на встройке(не знаю правда насколько хорошо она тянет кс го) Или надыбать где другую карту для теста. А вообще все это дело лучше проверять в офлайн проектах.
Надо помониторить фоновые процессы, что-то, что система считает очень приоритетным, периодически отодвигает все, в том числе и игруху и затыкает проц, нужно найти эту тварь и убить, и не забыть в планировщике тоже.
Member
Статус: Не в сети Регистрация: 14.06.2009 Откуда: Омск
LEOLEOLEO писал(а):
Треск в наушниках, заикание моей записи с микрофона samson meteor
на встройке проверяли? А с другой картой?
SubL0ck писал(а):
В общем, моя проблема, судя по всему, была связана с беспроводной мышью Logitech PRO Wireless.
нужны подробности. Проблема была в одной единственной игре из-за мыши? И как "решилась", подключением проводной? Почему у людей нет проблем с этой мышью, они не жалуются на задержки, лаги и т.д., включая про игроков?
Вы не можете начинать темы Вы не можете отвечать на сообщения Вы не можете редактировать свои сообщения Вы не можете удалять свои сообщения Вы не можете добавлять вложения