Ratio CMOS Setting: #8
FSB Frequency: #450
CPU Clock Skew: #Auto
NB Clock Skew: #Auto 
FSB Strap to North Bridge: #Auto
DRAM Frequency: #Auto

DRAM CLK Skew on Channel A1: #Auto
DRAM CLK Skew on Channel A2: #Auto
DRAM CLK Skew on Channel B1: #Auto
DRAM CLK Skew on Channel B2: #Auto
DRAM Timing Control: #Manual

1st Information:

CAS Latency: #5 DRAM Clocks
DRAM RAS to CAS Delay: #5 DRAM Clocks
DRAM RAS Precharge: #5 DRAM Clocks
DRAM RAS Activate to Precharge: #15 DRAM Clocks
RAS to RAS Delay: AUTO
Row Refresh Recycle Time: AUTO   
Write Recovery Time: AUTO
Read to Precharge Time: AUTO

2nd Information:

Read to Write Delay (S/D): AUTO
Write to Read Delay (S): AUTO
Write to Read Delay (D): AUTO
Read to Read Delay (S): AUTO
Read to Read Delay (D): AUTO
Write to Write Delay (S): AUTO
Write to Write Delay (D): AUTO


3rd Information:

Write to PRE Delay: Auto
Read to PRE Delay: Auto
PRE to PRE Delay: Auto
All PRE to ACT Delay: Auto
All PRE to REF Delay: Auto
DRAM Static Read Control: Enabled
DRAM Read Training: Auto
MEM. OC Charger: Auto
Ai Clock Twister: Moderate
Ai Transaction Booster: Manual

Common Performance Level: 8
Pull-in of CHA PH1: Disabled
Pull-in of CHA PH2: Disabled
Pull-in of CHA PH3: Disabled
Pull-in of CHB PH1: Disabled
Pull-in of CHB PH2: Disabled
Pull-in of CHB PH3: Disabled

PCIE Frequency: #101

CPU Voltage: #1.3000
CPU PLL Voltage: #1.55
FSB Termination Voltage: #1.31200
DRAM Voltage: #2,1
North Bridge Voltage: #1.31200
South Bridge 1.5 Voltage: #1.50
South Bridge 1.1 Voltage: #1.10

CPU GTL Reference (0): Auto
CPU GTL Reference (1): Auto
CPU GTL Reference (2): Auto
CPU GTL Reference (3): Auto
NB GTL Reference: Auto
DDR2 ChA Reference Voltage: Auto
DDR2 ChB Reference Voltage: Auto
North Bridge DDR Reference: Auto


CPU Configuration:

Ratio CMOS Setting: 8
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Intel Virtualization Tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled

Load-Line Calibration: Enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled