MB Intelligent Tweaker(M.I.T.)

Robust Graphics Booster .................: Auto
CPU Clock Ratio .........................: 9x
Fine CPU Clock Ratio.....................: +5.0
CPU Frequency ...........................: 3.80GHz


********** Clock Chip Control ************

>>>>> Standard Clock Control
CPU Host Clock Control...................: Enabled
CPU Host Frequency (Mhz) ................: 401Mhz
PCI Express Frequency (Mhz) .............: 100

C.I.A.2 .................................: Disabled

>>>>> Advanced Clock Control [Press Enter]
CPU Clock Drive..........................: 800mV
PCI Express Clock Drive..................: 900mV
CPU Clock Skew (ps)......................: 0ps
MCH Clock Skew (ps)......................: 0ps


********** DRAM Performance Control ******

Performance Enhance......................: Turbo]
Extreme Memory Profile (X.M.P.)..........: Disabled Нет такой настойки
(G)MCH Frequency Latch...................: Auto
System Memory Multiplier ................: 4.00B Пробовал 4.00D, не грузит...
Memory Frequency (Mhz) ..................: 1604
DRAM Timing Selectable ..................: Manual

Standard Timing Control
CAS Latency Time.........................: 10
tRCD ....................................: 7
tRP'.....................................: 7
tRAS.....................................: 16

>>>>> Advanced Timing Control [Press Enter]
>>>>> Channel A Timing Settings [Press Enter]
Static tRead Value.......................: Auto   ?
>>>>> Channel B Timing Settings [Press Enter]
Static tRead Value.......................: Auto   ?

********** Motherboard Voltage Control ***
>>>>> CPU
Load-Line Calibration....................: Enabled
CPU Vcore................................: 1.350
CPU Termination..........................: 1.2
CPU PLL..................................: 1.65
CPU Reference............................: 0.76

>>>>> MCH/ICH
MCH Core.................................: 1.2
MCH Reference............................: 0.64
MCH/DRAM Reference.......................: 0.76 Хотя по идее 0.75
ICH I/O..................................: 1.5
ICH Core.................................: 1.1 Вроде тоже, нет такой настойки

>>>>> DRAM
DRAM Voltage.............................: Auto (1.9)
DRAM Termination.........................: Auto
Channel A Reference......................: Auto
Channel B Reference......................: Auto


Advanced Settings Этих всех настроек нет или я не вижу?

Limit CPUID Max. to 3....................: ?
No-Execute Memory Protect................: ?
CPU Enhanced Halt (C1E)..................: ?
C2/C2E State Support.....................: ?
C4/C4E State Support.....................: ?
CPU Thermal Monitor 2(TM2) ..............: ?
CPU EIST Function........................: ?
Virtualization Technology................: ?

    MB Intelligent Tweaker(M.I.T.)

    Robust Graphics Booster .................: Auto
    CPU Clock Ratio .........................: 13x
    Fine CPU Clock Ratio.....................: +0.0
    CPU Frequency ...........................: 3.90GHz


    ********** Clock Chip Control ************

    >>>>> Standard Clock Control
    CPU Host Clock Control...................: Enabled
    CPU Host Frequency (Mhz) ................: 300Mhz
    PCI Express Frequency (Mhz) .............: 100

    C.I.A.2 .................................: Disabled

    >>>>> Advanced Clock Control [Press Enter]
    CPU Clock Drive..........................: 800mV
    PCI Express Clock Drive..................: 900mV
    CPU Clock Skew (ps)......................: 0ps
    MCH Clock Skew (ps)......................: 0ps


    ********** DRAM Performance Control ******

    Performance Enhance......................: Turbo]
    Extreme Memory Profile (X.M.P.)..........: Disabled
    (G)MCH Frequency Latch...................: 333
    System Memory Multiplier ................: 3.20B
    Memory Frequency (Mhz) ..................: 960
    DRAM Timing Selectable ..................: Manual

    Standard Timing Control
    CAS Latency Time.........................: 5
    tRCD ....................................: 5
    tRP'.....................................: 5
    tRAS.....................................: 15

    >>>>> Advanced Timing Control [Press Enter]
    >>>>> Channel A Timing Settings [Press Enter]
    Static tRead Value.......................: 8
    >>>>> Channel B Timing Settings [Press Enter]
    Static tRead Value.......................: 8

    ********** Motherboard Voltage Control ***
    >>>>> CPU
    Load-Line Calibration....................: Disabled
    CPU Vcore................................: 1.400
    CPU Termination..........................: 1.300
    CPU PLL..................................: 1.500
    CPU Reference............................: 0.808

    >>>>> MCH/ICH
    MCH Core.................................: 1.100
    MCH Reference............................: Auto
    MCH/DRAM Reference.......................: Auto
    ICH I/O..................................: 1.500
    ICH Core.................................: 1.100

    >>>>> DRAM
    DRAM Voltage.............................: 2.080
    DRAM Termination.........................: Auto
    Channel A Reference......................: Auto
    Channel B Reference......................: Auto