Robust Graphics Booster .................: Auto
CPU Clock Ratio .........................: 6x
Fine CPU Clock Ratio.....................: +0.0
CPU Frequency ...........................: 2.40GHz (400x6)


********** Clock Chip Control ************

>>>>> Standard Clock Control
CPU Host Clock Control...................: Enabled
CPU Host Frequency (Mhz) ................: 333Mhz
PCI Express Frequency (Mhz) .............: 100

C.I.A.2 .................................: Disabled

>>>>> Advanced Clock Control [Press Enter]
CPU Clock Drive..........................: 800mV
PCI Express Clock Drive..................: 900mV
CPU Clock Skew (ps)......................: 0ps
MCH Clock Skew (ps)......................: 50ps


********** DRAM Performance Control ******

Performance Enhance......................: Turbo]
Extreme Memory Profile (X.M.P.)..........: Disabled
(G)MCH Frequency Latch...................: 333
System Memory Multiplier ................: 2.40B
Memory Frequency (Mhz) ..................: 960
DRAM Timing Selectable ..................: Manual

Standard Timing Control
CAS Latency Time.........................: 6
tRCD ....................................: 6
tRP'.....................................: 6
tRAS.....................................: 16

>>>>> Advanced Timing Control [Press Enter]
>>>>> Channel A Timing Settings [Press Enter]
Static tRead Value.......................: 9
>>>>> Channel B Timing Settings [Press Enter]
Static tRead Value.......................: 9

********** Motherboard Voltage Control ***
>>>>> CPU
Load-Line Calibration....................: Enabled
CPU Vcore................................: 1.325
CPU Termination..........................: 1.30
CPU PLL..................................: 1.50
CPU Reference............................: 0.823

>>>>> MCH/ICH
MCH Core.................................: 1.32
MCH Reference............................: 0.823
MCH/DRAM Reference.......................: Auto
ICH I/O..................................: 1.5
ICH Core.................................: 1.1

>>>>> DRAM
DRAM Voltage.............................: 2.00
DRAM Termination.........................: 1.03
Channel A Reference......................: 1.00
Channel B Reference......................: 1.00


Advanced Settings

Limit CPUID Max. to 3....................: Disabled
No-Execute Memory Protect................: Enabled
CPU Enhanced Halt (C1E)..................: Disabled
C2/C2E State Support.....................: Disabled
C4/C4E State Support.....................: Disabled
CPU Thermal Monitor 2(TM2) ..............: Enabled
CPU EIST Function........................: Disabled
Virtualization Technology................: Disabled