PRIME-Z370-P
PRIME Z370-A
TUF Z370-PRO GAMING
TUF Z370-PLUS GAMING
ROG STRIX Z370-I GAMING
ROG STRIX Z370-F GAMING
ROG STRIX Z370-G GAMING
ROG MAXIMUS X HERO
ROG MAXIMUS X HERO (WI-FI AC)
ROG MAXIMUS X APEX
ROG MAXIMUS X CODE
ROG MAXIMUS X FORMULA

Для начала необходимо отключить функцию Multicore enhancement, затем установить значение 0.01 для опций IA AC Load Line и IA DC Load Line. Далее необходимо выставить вручную напряжение на VCCIO и VCCSA в районе 1.1v. Затем вручную зафиксировать частоту на 4.6-4.7 ГГц, и выставить напряжение в ручном режиме в районе 1.3 вольта. Если система работает корректно, можно дальше увеличивать частоту и/или снижать напряжение.

How to use CSME v12 FWUpdate Tool: At CSME v12, Intel FWUpdate tool does not work with bare RGN or EXTR CSE firmware as it requires that they are first combined/stitched with the equivalent Power Management Controller (PMC) firmware, which is updated alongside the main CSE firmware. The CSME v12 archives below always include bare RGN or EXTR CSE firmware images so you must always stitch the equivalent PMC firmware first, via Flash Image Tool (FIT), before using Intel FWUpdate tool. To check if a CSE RGN/EXTR firmware region is already FWUpdate compatible, input it at ME Analyzer tool and make sure that "FWUpdate Support" is reported as "Yes". To generate the correct FWUpdate compatible CSME + PMC firmware combination for your system via FIT, you must first know your system's Chipset Platform (H, LP), Chipset Type (Consumer, Corporate, Slim) and Chipset Stepping/Revision (A, B, C etc).

Download the latest Intel CSME System Tools (Section C) as well as ME Analyzer tool.
From Intel CSME System Tools, run MEInfo command line tool and under "Intel(R) ME code versions" > "FW Version" you will find your system's Chipset Platform as well as Type (i.e. H Consumer etc). Under "PCH Information" > "PCH Step Data" you will find your system's Chipset Stepping which starts with a letter (Ax, Bx, Cx etc).
Alternatively, only if you cannot use MEInfo, drag & drop your system's SPI/BIOS image at ME Analyzer tool and find "SKU" field which shows your system's Chipset Type and Platform (i.e. Consumer H). Next, find "Chipset Stepping" field which lists one or more supported Chipset Steppings in the form of letters (A, B, C etc).
Based on your system's Chipset Platform, Type and Stepping, choose the correct CSME and PMC firmware (Section B).
Input the chosen CSME firmware into ME Analyzer tool and make sure that "FWUpdate Support" is not reported as "Impossible".
From Intel CSME System Tools, run Flash Image Tool (FIT) and adjust the Chipset Platform drop-down menu at the top to either "H Series Chipset" or "LP Series Chipset" based on your system's Chipset Platform. For the purposes of FWUpdate, there is no need to further adjust the Chipset SKU.
Load/drop the chosen CSME firmware image and then input the chosen PMC firmware at "Flash Layout" > "Ifwi: Intel(R) Me and Pmc Region" > "PMC Binary File".
Adjust "Flash Settings" > "Flash Components" > "Number of Flash Components" to "0".
Adjust "Integrated Sensor Hub" > "Integrated Sensor Hub" > "Integrated Sensor Hub Supported" to "No".
Build the image and use "cse_image_FWU_Base.bin" at Intel FWUpdate tool.