The Samsung Odyssey Neo G7 has a flicker-free backlight with the brightness at higher levels, which helps reduce eye strain. With the local dimming disabled, the flicker starts with the brightness set to '10' or lower, and the flicker is high enough that you won't notice it. However, the pulse width modulation (PWM) behaves differently with the local dimming enabled. With the brightness at '19', it flickers at 240Hz, and the flicker fluctuates as the brightness goes down until it's at 165Hz with the brightness at '0'. This flicker is more noticeable the lower the brightness drops, so if a bright screen doesn't bother you, it's best to leave it at high brightness, especially if you have local dimming enabled. You can see the flicker chart with the Local Dimming on 'High' here. We also took a motion blur photo with VRR enabled, the Local Dimming on 'High', and the Brightness at '18', resulting in a 165Hz flicker, but it's hard to see the flicker based on the photo. Enabling the VRR Control setting also helps reduce and nearly eliminate this flicker.

Another issue the Samsung Odyssey Neo G7 has is with scanlines. Scanlines are most noticeable with test patterns, like patterns 2a and 2b from Lagom. You can see an example of the scanlines in the green section here and you can also see it more clearly with a zoomed-in image here. Other test patterns cause the scanlines, and you can see an image of what the scanlines look like here. This video is a good example to see the scanlines and flicker issues in the green section with the Local Dimming set to 'High', VRR enabled, VRR Control off, and the Brightness at 100. Keep in mind that these scanlines are most noticeable with test patterns, and they're hard to see and rarely happen with real content. If you notice them, lowering the Sharpness can help reduce the issue, but it doesn't completely fix it.

сижу с загипсованой ногой

От самсунга Одиссей кстати тоже был не в восторге .