OС: Windows 7 64-Bit / Windows 8 64-Bit / Windows 8.1 64-Bit
Процессор: Intel® Core™ i3-530 @ 2.93 GHz / AMD Phenom™ II X4 810 @ 2.60 GHz
Оперативная память: 6 GB RAM
Видеокарта: NVIDIA® GeForce® GTX 470 @ 1GB / ATI® Radeon™ HD 6970 @ 1GB
DirectX: Version 11
Жесткий диск: 60 GB

Технический FAQ

Q:Драйвера для игры
A: AMD | NVIDIA

Для более стабильного ФПС и работы игры в целом, рекомендуется установить размер файла подкачки по выбору системы.

Q: как увеличить отзывчивость мышки в игре
A:если у вас монитор 60ГЦ - включить параметр Vsync, установить макс. ФПС - 58 в меню игры.

Q: как увеличить отзывчивость мышки в игре (способ от Alex_Smile)
A:Фикс для устранения "плавающей" мышки

Q:низкий ФПС с процессором i5
A:изменить значение WorkerThreads = 4 на WorkerThreads = 2 в вашем config.ini файле по пути C:\Program Files (x86)\Steam\steamapps\common\Call of Duty Black Ops III\players\config.ini убрали с новым патчем такой параметр

Q:не стабильный ФПС
A:включите тройную буферизацию в вашем config.ini файле по пути C:\Program Files (x86)\Steam\steamapps\common\Call of Duty Black Ops III\players\config.ini
//Set to 3 to enable triple buffering, useful to prevent large framerate drops when vsync is enabled
BackbufferCount = "3" // 2 to 3

Q:как избавится от лагов в МП
A:достаточно забанить в фаейрволе диапазон 173.199.67.0-173.199.67.255. При этом Вы не будете играть на серверах в России. Не забудьте также убрать данную блокировку через время, если это нужно конечно.
Пример настройки - Call of Duty: Black Ops III #13358797
Как избавиться от лагов в мультиплеере штатными средствами Windows
Видео - Call of Duty: Black Ops III lag fix https://youtu.be/EDRyF6-U7is


Q:чем отличаются настройки графики?
A:разбор здесь

//
//Gameplay
//

//Frame rate cap (0 for none)
MaxFPS = "90" // 0 to 1000

//Show current framerate on screen
DrawFPS = "0" // 0 or 1

//Toggle framerate smoothing
SmoothFramerate = "0" // 0 or 1

//Horizontal field of view in degrees assuming 16:9 aspect ratio
FOV = "120" // 65 to 120

SplitscreenOrientation = "0" // 0 or 1

//Enable network voice chat
VoiceChat = "0" // 0 or 1

//Enable occlusion of sound behind solid surfaces
SoundOcclusion = "1" // 0 or 1

//Mouse smoothing amount
MouseFilter = "0" // 0 to 10

MouseAcceleration = "0" // 0 to 1

MouseSensitivity = "2" // 0.1 to 30

//Mouse vertical sensitivity
MouseVerticalSensitivity = "0.022" // -1 to 1

//Enable vertical look with the mouse
MouseVerticalLook = "1" // 0 or 1

//Maximum number of simultaneous human corpses
CorpseCount = "32" // 1 to 32

//Number of frames the driver is allowed to enqueue, a lower value improves input latency but may decrease performance. Set it to 0 to use the system default, usually 3.
MaxFrameLatency = "0" // 0 to 4

//
//Setup
//

//Set to zero to force auto-detect to run at startup
AutoDetectHasRun = "1" // 0 or 1

//Clear to check driver against recommended
LastDriverNvidia = "0" // 0 or bigger

//Clear to check driver against recommended
LastDriverAMD = "0" // 0 or bigger

//Fraction of video memory usage to target
VideoMemory = "0.75" // 0.75 to 1

//
//Display
//

// 0 - Windowed, 1 - Fullscreen, 2 - Fullscreen Window
FullScreenMode = "1" // 0 to 2

//Window X position
WindowX = "-8" // -8192 to 8192

//Window Y position
WindowY = "0" // -8192 to 8192

WindowSize = "1920x1080" // any text

RefreshRate = "60" // 1 to 240

//Monitor index to use for fullscreen
Monitor = "1" // 0 to 8

//Vsync only applies in fullscreen
Vsync = "0" // 0 or 1

//Percentage of window resolution that the 3D scene renders at
ResolutionPercent = "100" // 50 to 200

//Color spaces for monitor output
DisplayGamma = "sRGB" // sRGB, rec.709, or rec.709 - Limited

//Set to 3 to enable triple buffering, useful to prevent large framerate drops when vsync is enabled
BackbufferCount = "2" // 2 to 3

//
//Graphics
//

//LOD's to drop on models, lower numbers are higher quality
MeshQuality = "1" // 0 to 8

//0 - Force 2x anisotropic filtering, 1 - Per material, 2 - Force 16x anisotropic filtering
TextureFilter = "0" // 0 to 2

//Number of mips to drop on streamed textures, lower numbers are higher quality
TextureQuality = "0" // 0 to 3

//Number of mips to drop on effects and dynamic decals, lower numbers are higher quality
TextureQualityFX = "0" // 0 to 15

//Number of mips to drop on reflections, lower numbers are higher quality
TextureQualityProbes = "0" // 0 to 16

//Number of mips to drop on sun shadows, lower numbers are higher quality
TextureQualityBakedSunShadows = "0" // 0 to 2

//Force lowest mips to stay loaded instead of streaming
TextureLowDetailResident = "1" // 0 or 1

DisableDynamicLightShadows = "0" // 0 or 1

DisableDynamicSunShadows = "0" // 0 or 1

//Resolution of spot light shadows
SpotShadowTextureSize = "128" // 128 to 8192

//Resolution of omni (point) light shadows
OmniShadowTextureSize = "128" // 128 to 2048

//Enable multi-sampled soft shadows
ShadowFiltering = "0" // 0 or 1

//Number of lights with otherwise static shadows to force characters shadows on
ActorShadows = "0" // 0 to 16

//Enable volumetric sun and light shafts
VolumetricLightingEnabled = "1" // 0 or 1

//Number of raymarch samples for sunlight
VolumetricLightingMaxSunSamples = "8" // 1 to 256

//Number of raymarch samples for local lights
VolumetricLightingMaxLightSamples = "8" // 1 to 256

//Skip every other sample if color is constant
VolumetricLightingSkipSunSamples = "1" // 0 or 1

//Skip every other sample if color is constant
VolumetricLightingSkipLightSamples = "1" // 0 or 1

//Enabled order-independent transparency
OIT = "1" // 0 or 1

//Maximum number of overlapping transparency layers
OITLayers = "8" // 8, 9, 12, or 16

//Screen-space ambient occlusion method
SSAOTechnique = "GTAO Medium Quality" // Disabled, HEMIAO, GTAO Low Quality, GTAO Medium Quality, GTAO High Quality, or GTAO Ultra Quality

//Anti-aliasing technique
AATechnique = "FXAA" // None, FXAA, SMAA 1x, Filmic SMAA 1x, SMAA T2x, or Filmic SMAA T2x

//Per-object motion blur
MotionBlur = "Off" // Off, Auto, or On

MotionBlurQuality = "Low" // Low, Medium, or High

//Better lighting for skin
SubsurfaceScattering = "1" // 0 or 1