4.8 при 1.3в и 85с .. и это без HT

Table 7-4. Processor Core Active and Idle Mode DC Voltage and Current Specifications
(Sheet 1 of 2)
VID Range 0.2500 — 1.5200

Desktop 3rd Generation Intel® Core™ Processor Family SKUs
ProcessorNumberTDP(W)IA LFM Frequency IA Frequency range GT Frequency range TjMAX(°C)
i7-3770T 45 1600 MHz 2.5 GHz up to 3.7 GHz 650 MHz up to 1150 MHz 94
i7-3770S 65 1600 MHz 3.1 GHz up to 3.9 GHz 650 MHz up to 1150 MHz 103
i7-3770K 77 1600 MHz 3.5 GHz up to 3.9 GHz 650 MHz up to 1150 MHz 105
i7-3770 77 1600 MHz 3.4 GHz up to 3.9 GHz 650 MHz up to 1150 MHz 105
i5-3570T 45 1600 MHz 2.3 GHz up to 3.3 GHz 650 MHz up to 1150 MHz 94
i5-3570K 77 1600 MHz 3.4 GHz up to 3.8 GHz 650 MHz up to 1150 MHz 105
i5-3550S 65 1600 MHz 3 GHz up to 3.7 GHz 650 MHz up to 1150 MHz 103
i5-3550 77 1600 MHz 3.3 GHz up to 3.7 GHz 650 MHz up to 1150 MHz 105
i5-3450S 65 1600 MHz 2.8 GHz up to 3.5 GHz 650 MHz up to 1100 MHz 103
i5-3450 77 1600 MHz 3.1 GHz up to 3.5 GHz 650 MHz up to 1100 MHz 105

The processor’s rated frequency assumes that all execution cores are running an
application at the thermal design power (TDP). However, under typical operation, not
all cores are active. Therefore most applications are consuming less than the TDP at the
rated frequency. To take advantage of the available thermal headroom, the active cores
can increase their operating frequency.
To determine the highest performance frequency amongst active cores, the processor
takes the following into consideration:
• The number of cores operating in the C0 state
• The estimated current consumption
• The estimated power consumption
• The temperature
Any of these factors can affect the maximum frequency for a given workload. If the
power, current, or thermal limit is reached, the processor will automatically reduce the
frequency to stay with its TDP limit.

Thermal Trip: The processor protects itself from catastrophic
overheating by use of an internal thermal sensor. This sensor is
set well above the normal operating temperature to ensure that
there are no false trips. The processor will stop all execution
when the junction temperature exceeds approximately 130 °C.
This is signaled to the system by the THERMTRIP# signal.

Присоединяюсь, как с ровностью крыш на Айви? На Санди караул. Может их перед тестами шлифовать надо?

KellNet На сколько ровная крышка у твоего процессора?