Мне сразу показалось странным что он весит 1кб :\ так он еще и разархивироваться не хочет. Может я что то не понял? или его можно взять в другом месте?

И второй вопрос:
У меня Sapphie Radeon 9550 128mb 128bit Hynix 4нс. Когда я двигаю ползунки в ати тулс, то они при запуске 3д приложений перемещаются в стандартное положение 250/200. Похоже на защиту от разгона. Можно ли справиться с этим без перепрошивки биоса? а то боюсь

Не тем разархивируешь, а вообще лучше закачай себе дрова Фрсаж, это перепакованные и уже разлоченые

Берешь скрипт отсюда http://www.overclockers.ru/cgi-bin/file ... rotect.rar далее разархивируешь в папку с установленой rivatuner после все достаточно подробно описано в статье http://www.overclockers.ru/news/newsite ... 1070013468 ,если rivatuner последней версии то никакого скрипта качать не надо-там все есть,если дрова catalyst4.8 то может не помочь
(что-то у меня не получается с данной версией)

Поправлюсь, "Форсаж" - в народе
а это что б долго не искал:
http://hardwarelab.ru/files/[/url]

ок, спасибо большое

Очень хорошая новость.............

RivaTuner 2.0 RC15.1 is on the way

I'm glad to say that RC15.1 development has been finished at last and closed beta testing stage will start within a few minutes. New version is supposed to be launched on the next Monday (6th Sep). Changes list:


quote:


Minor bugfixes:

- RivaTuner's driver-level color schemes are no longer lost after creating at least one non-standard color scheme via the ForceWare's control panel applet.

What's new:

- Added ForceWare 65.xx - 66.xx driver families support.
- Added databases for the ForceWare 61.76, 61.77, 65.91 and 66.00 drivers for Windows 2000/XP.
- Added PCI-E NV40 series display adapters support.
- A lot of NV40 / R420 specific enhancements, new diagnostic and tuning features. Thanks to Andrew Woribiew for providing ATI RADEON X800PRO and NVIDIA GeForce 6800 samples.
- Added active pixel pipelines / vertex processors count detection for NV40 based display adapters.
- Updated bundled NVInfo v1.3 DOS utility. Now NVInfo supports NV40 series and can display diagnostic info including active pixel pipelines / vertex processors count. This feature allows you to verify NV40 based display adapter right from the bootable floppy before purchasing it.
- Updated bundled NVStrap v1.5 driver. Now the driver supports NV40 GPU series and provides NV40 owners previously available AGP SBA / AGP FW and PCI DeviceID strapping settings as well as absolutely new unique feature specific for this GPU family - custom graphics processor configuration panel. This panel allows you to alter an amount of active pixel pipelines and vertex processors of NV40 GPU, so any GeForce 6800 GT / Ultra board can be turned to GeForce 6800 or GeForce 6800 LE via disabling required amount of pixel pipelines and vertex processors at software level. Furthermore, some GeForce 6800 owners will be able to unlock software masked pixel pipelines and vertex processors and greatly boost performance. Take a note that both pixel pipelines and vertex processors on GeForce 6800 (LE) boards can be locked either at hardware or at software level. RivaTuner will be able to unlock them in the second case only.
- Updated "NVIDIA VGA BIOS information" diagnostic report category for NV40 GPU based display adapters:
- Added performance level table decoding. Performance level specific core / memory clocks and core voltage are now displayed on NV40 based boards too. Take a note that wrongly voltmodded VGA BIOS'es are also already available in the net, so you may use the information displayed in RivaTuner to validate any software voltmodded BIOS. All NV3x+ software voltage mod details discussed in RivaTuner's FAQ before, also fully apply to NV40 GPUs, so please refer to RivaTuner's FAQ to get more information on it.
- Added GPU units mask info for NV40 GPU based boards. This mask tells you if VGA BIOS contains any softmasked pixel pipelines and vertex processors and can be used for fast detecting softmoddable boards.
- Removed obsolete VCO frequency limits info for NV40 GPU based boards.
- Updated "NVIDIA specific display adapter information" diagnostic report category. Now besides hardwired ID RivaTuner displays ROM softstrapped PCI DeviceID on NV3X+ based boards.
- Now during displaying "NVIDIA VGA BIOS information" diagnostic report category RivaTuner reads VGA BIOS contents directly from flash ROM. This feature was implemented in order to access NV40's performance level tables, located outside ROM copy accessible via standard ISA address space.
- Added DVC control for NV40 based boards.
- Added RADEON 9550 series support.
- Updated SoftR9x00 and ATIOverclockingAntiprotection patch scripts for the Catalyst 4.7, 4.8 and 4.9 beta for Windows 2000/XP.
- Added fan duty cycle monitoring for LM63 capable R360 and R420 based boards with reference cooling system. Take a note that it is impossible to monitor the real fan speed on these boards because of lack of feedback between fan's tachometer output and sensor chip, so monitored fan duty cycle is a target fan speed programmed by the sensor, but not the real one. Actual speed may be lower due to fan malfunction and other factors.
- Added fan speed control for LM63 capable R360 and R420 based boards with reference cooling system. Now you may use either default temperature controlled dynamic fan speed mode, or improve your R360/R420 cooling at the cost of noise due to fixed 100% fan speed mode.
- Added detailed memory timings decryption for R420 based display adapters.
- Added DDR3 memory type detection for R420 based display adapters.
- Added command line interface for saving VGA BIOS image for all supported NVIDIA display adapters and ATI R300+ based display adapters. Use /BI command line switch to extract and save VGA BIOS image in a file. In addition to that, RivaTuner also provides previously undocumented /BD command line switch, allowing you to save dump of VGA BIOS stored in memory. Take a note that this feature works even with unsupported display adapters (e.g. Matrox), but the dump created with this command line switch is not flashable and can be used for scientific needs (e.g. reverse engineering) only.
- Updated RivaTunerEx.sys driver incorporates new IOCTL, allowing RivaTuner to execute some portions of code in kernel mode. Since this version RivaTuner executes all low-level I2C access code in kernel mode to minimize risk of collision with other applications accessing ATI I2C bus at low level. However, the previous user mode I2C access method can be also activated with ATII2CKernelModeAccess registry entry.
- Improved graphics processor core detection scheme for both NVIDIA and ATI display adapters. Now RivaTuner.cfg file contains user customizable PCI DeviceID indexed table of supported graphics processors. This will not make RivaTuner forward compatible with future graphics processors, but will greatly simplify process of adding support of new display adapters based on supported GPUs.
- Updated monitor manufacturers list.
- Improved database format. Now string registry entries may also use interpretators of ENUM type.
- Now all RivaTuner's command line interfaces can provide an access to non-primary display adapters.
- Easter eggs updates. Added hidden command line interface for AND, OR and XOR based GPU registers modification commands.
- FAQ updated.
- Minor UI changes and improvements.

Уррррррррраааааа!!!!!!!!!!!!!!!!!!!!!!!!!

Sergey7777, cсылочку плиз на RivaTuner 2.0 RC15.1

Sergey7777
а если почитать?

или на русском: http://www.overclockers.ru/news/newsite ... 1093949965

fin, согласен, ВНИМАТЕЛЬНОСТЬ ПРЕЖДЕ ВСЕГО!!!
спасибо за замечание.

Мужики!А у меня метод такой!!Я нахожу оптимальные максимальные частоты ривой...потом чуть чуть снижаю для страховки и ручками вручную прошиваю частоты в БИОС!!получается аппаратный разгон!он лучше намного!=))))))))))

Можно поподробнее, как это ручками вручную и что это даёт особо то?

RivaTuner 15.1 вышел. Всем срочно качать........ (Пока на Guru3D.com)

Вот новость: http://www.overclockers.ru/news/newsite ... 1094470959
вот ссылка: http://www.overclockers.ru/cgi-bin/file ... 0RC151.rar

На nvworld.ru подробный перечень нововведений на русском.

только вот, что-то я не встретил еще никого у кого конвееры включались бы NVStrap. Вот отключаться - это на ура, а включение других не проходит, мы все что-то не так делаем или Бета-тест оказался не очень!?

Mefisto
С чего вы это взяли? 5900XT в Pro легко сделать.

Речь идет о Geforce 6800

Типичный самоуверенный рашн пользователь. Не работает - значит бета-тест оказался не очень. А в себе ошибку не пробовали поискать? Хотя бы в в контекстную помощь заглянуть или в FAQ? Ну что за народ...

Mefisto Аппаратная защита от включения, вот тут почитай.

Привет Всем,
Вопрос, как ривой посмотреть температуру ядра (график), у меня по умолчанию только частоты показываются? Palit 5900xt (сиреневая).
Спасибо заранее.