INSTRUCTIONS

    This DSP plugin gets rid of tracks in different
    volumes. Depending on the settings and the audio
    material it can also drastically enhance the sound
    of tracks which already have full level.


    Max amp:
      maximum amplification (up to 20 dB = 10x)

    Amp raise:
      time the enhancer tends towards the maximum
      amplification level. Faster raise will enhance more
      but can also produce more distortions on some input
      material. To keep the sound of dynamic music natural
      choose longer values (500 ms or more), to enhance the
      presence try shorter values (80..130 ms) combined with
      a faster 'Amp reduce' value (0.4 ms).

    Amp reduce:
      if the maximum output level is too high the
      amplification will quickly be reduced with this speed.
      To minimize distortions it must not be too slow but
      even not too fast. Recommended values are from 0.4 ms
      to 1.0 ms.

    Threshold:
      if enabled the enhancer tries to look ahead to reduce
      the amplification if the output level would pass the
      adjusted value. The output level is not generally
      limited to the threshold. It rather represents a
      'headroom' to catch audible distortions if 'Amp reduce'
      does not react fast enough.

    Treble enhance:
      raises upper trebles on a scale from 0 to 10 before
      passing the compressor.

    Stereo width:
      enhances the channel separation on a scale up to 50%
      before passing the compressor. On no stereo enhancement
      it shows "normal".