Google выдает ценники на 939 сокет в 2300/2600 руб.

На ней ХР только без проблем

чипа GT200- он не отваливается

взять бэушную мамку под 939 на VIA

Умерла A8NE

ECS RS482-M вроде нормальная мать ? ATI Xpress 200 и mATX .... Чип вроде неплохой и встроенную графику можно испльзовать . mATX то же плюс , в корпус от HTPC хочу засунуть . Но блин планки на заднию панель нет

И не ерундить , всё на этих мамках есть и PCI-E и камни двухъядерные .

ECS RS482-M вроде нормальная мать ?

This motherboard from ECS has basic overclocking options, but its base clock (HTT clock) goes only up to 250 MHz, while on its competitor from Foxconn we can configure it up to 450 MHz.
However for an entry-level product a 250 MHz limit would be a very reasonable one. Using our CPU that has an 11x multiplier, we could reach up to 2,750 MHz (250 MHz x 11), a 20% increase on its internal clock rate.
The whole problem is that this ECS motherboard wasn’t stable even configuring only 205 MHz, what was a big deception and prevented us from performing overclocking tests with this motherboard.
Another issue is the available timing settings. ECS only provided two adjustments: one for CAS latency and another for memory speed (100, 166, 200 and 250 MHz). In order to enable these options, you need to change this motherboard from “auto” mode (which uses the memory SPD to adjust memory timings), but when we changed this setting our motherboard became extremely unstable on our tests. What a bummer.

Да и пофиг ... какой разгон ...